SpinalEnum

Description

The Enumeration type corresponds to a list of named values.

Declaration

The declaration of an enumerated data type is as follows:

object Enumeration extends SpinalEnum {
  val element0, element1, ..., elementN = newElement()
}

For the example above, the default encoding is used. The native enumeration type is used for VHDL and a binary encoding is used for Verilog.

The enumeration encoding can be forced by defining the enumeration as follows:

object Enumeration extends SpinalEnum(defaultEncoding=encodingOfYourChoice) {
  val element0, element1, ..., elementN = newElement()
}

备注

If you want to define an enumeration as in/out for a given component, you have to do as following: in(MyEnum()) or out(MyEnum())

Encoding

The following enumeration encodings are supported:

Encoding	Bit width	Description
native		Use the VHDL enumeration system, this is the default encoding
binarySequential	log2Up(stateCount)	Use Bits to store states in declaration order (value from 0 to n-1)
binaryOneHot	stateCount	Use Bits to store state. Each bit corresponds to one state

Custom encodings can be performed in two different ways: static or dynamic.

/*
 * Static encoding
 */
object MyEnumStatic extends SpinalEnum {
  val e0, e1, e2, e3 = newElement()
  defaultEncoding = SpinalEnumEncoding("staticEncoding")(
    e0 -> 0,
    e1 -> 2,
    e2 -> 3,
    e3 -> 7)
}

/*
 * Dynamic encoding with the function :  _ * 2 + 1
 *   e.g. : e0 => 0 * 2 + 1 = 1
 *          e1 => 1 * 2 + 1 = 3
 *          e2 => 2 * 2 + 1 = 5
 *          e3 => 3 * 2 + 1 = 7
 */
val encoding = SpinalEnumEncoding("dynamicEncoding", _ * 2 + 1)

object MyEnumDynamic extends SpinalEnum(encoding) {
  val e0, e1, e2, e3 = newElement()
}

Example

Instantiate an enumerated signal and assign a value to it:

object UartCtrlTxState extends SpinalEnum {
  val sIdle, sStart, sData, sParity, sStop = newElement()
}

val stateNext = UartCtrlTxState()
stateNext := UartCtrlTxState.sIdle

// You can also import the enumeration to have visibility of its elements
import UartCtrlTxState._
stateNext := sIdle

Operators

The following operators are available for the Enumeration type:

Comparison

Operator	Description	Return type
x === y	Equality	Bool
x =/= y	Inequality	Bool

import UartCtrlTxState._

val stateNext = UartCtrlTxState()
stateNext := sIdle

when(stateNext === sStart) {
  ...
}

switch(stateNext) {
  is(sIdle) {
    ...
  }
  is(sStart) {
    ...
  }
  ...
}

Types

In order to use your enums, for example in a function, you may need its type.

The value type (e.g. sIdle’s type) is

spinal.core.SpinalEnumElement[UartCtrlTxState.type]

or equivalently

UartCtrlTxState.E

The bundle type (e.g. stateNext’s type) is

spinal.core.SpinalEnumCraft[UartCtrlTxState.type]

or equivalently

UartCtrlTxState.C

Type cast

Operator	Description	Return
x.asBits	Binary cast to Bits	Bits(w(x) bits)
x.asUInt	Binary cast to UInt	UInt(w(x) bits)
x.asSInt	Binary cast to SInt	SInt(w(x) bits)
e.assignFromBits(bits)	Bits cast to enum	MyEnum()

import UartCtrlTxState._

val stateNext = UartCtrlTxState()
myBits := sIdle.asBits

stateNext.assignFromBits(myBits)